You can't promise every one can use the saw blade in proper ways and they use right saw blade to cut the stone and concrete, the unproper operation may stop the diamond grit expose and makes the saw blade being not sharp enough. Sometimes the material being cut is not abrasive enough to expose a new diamond. If the diamond saw blade is not sharp enough, it will rub against the surface resulting in heat build-up in the diamond segments, even the diamond segments may drop at last and danger happen! To sharp the diamond blade, it is necessary to Dress the diamond blade.
To dress the blade, it is necessary to cut something that is abrasive enough, and ensure expose the new diamond grit. Good results can be achieved by cutting a bricks, concrete block, asphalt. Cut approximately 10-20 feet to adequately dress the diamond blade. You can also use whetstone to grind the segments.
Which diamond blades need to be dressed?
There are just a few diamond grits on the surface of segments.The diamond grits in the matrix worn flat and appear shiny.
The diamond blade stops cutting or noticeably slows down.
The cutting noise is louder than usual or the saw blade shakes violently.
Related Articles:
a. Diamond saw blade cutting trouble shooting, diamond blade problem happens?
b. How do you select right diamond saw blade?
c. Why choose ChinShine as your China diamond blades supplier? Why buy diamond saw blades from us?
d. The Reputable Cutting Sharpness and Precision Level Of ChinShine Marble saw Blades
e. Troubleshooting Wall Saw Blade and Concrete Diamond Blade
f. How to choose diamond blade?
Previous: Why Pakistan dealer choose ChinShine diamond segment? Next:How to choose a reliable diamond segment and diamond saw blade manufacturer?
Thank you for your interest in the above content, please leave us inquiry, you can expect a response within 24 hours.
Required fields are marked *
|
|
|
|