Diamond cutting blades are made up of diamonds arrange in a metal matrix. It is a synthetic tool use for cutting, slicing, wafering, slabbing, singulation, cross sectioning, cut-off, rough cutting application, grooving, slotting and so on. Diamond cutting blades can either be bonded through sintered metal powder, a segment or rim, and a metal core. Metal matrix supports the diamonds to keep it intact in its position thus casing the blade to last longer.
Usually, diamond blades are used for wet cutting because it is said that water extend the life of the blade and dust can be controlled. But there are some instances that dry cutting should be performed. Such situations like electrical power source is present, obviously it is not safe to do wet cutting because it will cause some risk. If the work area should be kept dry, then dry cutting is required. Some work area is far from a water source so a wet cutting is impossible to do.
Dry cutting:
Select a proper diamond cutting blades which are applicable for dry cutting. An example of this is the laser welded diamond cutting blades that are designed to do dry cutting works.
In dry cutting, alternating and thin cutting should be done in order to let the air flow around the blades. It is because in the process of dry cutting, cooling the blade requires air. Thus, dry cut blades are made with a wider space between segments. The operator should use the cutting blade lightly. Never applied a great amount of force because it might damage the blade and can cause overheating.
Wet cutting:
In wet cutting applications, water is used to wash out particles and remove dust.
Water also acts as the coolant for the cutting blade which causes it to make deeper cuts.
Usually, diamond blades are used for wet cutting because it is said that water extend the life of the blade and dust can be controlled. But there are some instances that dry cutting should be performed. Such situations like electrical power source is present, obviously it is not safe to do wet cutting because it will cause some risk. If the work area should be kept dry, then dry cutting is required. Some work area is far from a water source so a wet cutting is impossible to do.
Dry cutting:
Select a proper diamond cutting blades which are applicable for dry cutting. An example of this is the laser welded diamond cutting blades that are designed to do dry cutting works.
In dry cutting, alternating and thin cutting should be done in order to let the air flow around the blades. It is because in the process of dry cutting, cooling the blade requires air. Thus, dry cut blades are made with a wider space between segments. The operator should use the cutting blade lightly. Never applied a great amount of force because it might damage the blade and can cause overheating.
Wet cutting:
In wet cutting applications, water is used to wash out particles and remove dust.
Water also acts as the coolant for the cutting blade which causes it to make deeper cuts.
Previous：Transient Introduction on Diamond Blade Software Assortment Next：Which Blade Is Right For You?
Thank you for your interest in the above content, please leave us inquiry, you can expect a response within 24 hours.
Required fields are marked *
|
|
|
|
