Diamond tool is a cutting, grinding or polishing tool with diamond grains fixed on the working parts of the tool via some kinds of bond materials or by some other special means. Diamond tools is suited for cutting,grinding, drilling and polishing hard abrasive materials, such as stone, concrete, ceramics, bricks, glasses, fire-proof materials and other similar materials. Important note: diamonds should not be used for cutting steel or iron, as carbon will dissolve into the workpiece and lead to tool wear and work hardening. Diamond tools manufacturer has special formula in its diamond segments for cutting or drilling reinforced concrete(which contain steel bars), unavoidably, the life of diamond tools will be shorted.
.
.
For metal-bonded diamond tools, the bond is one of the prime factors when selecting which tool to use for cutting or grinding a specific material depending on how hard, or abrasive, the material is. The bond is what decides the rate at which the metallic powders wear down and expose new diamond crystals at the surface to maintain what would be considered a “sharp” edge.
For example, when cutting hard materials, a diamond blade with a soft bond would be needed. This means the metallic powders in the diamond segments (teeth) of the diamond blade wear fast enough to release old, dull crystals, exposing new diamond grains at the edges to continue cutting efficiently. Inversely, to cut a soft abrasive material like asphalt or freshly poured concrete, you would need to use a hard bonded diamond blade so that the segments and diamond grains do not wear down prematurely and the blade is not put to waste. The diamonds used in these tools are synthetic or natural industrial diamond of different grain sizes and shapes.
ChinShine manufactures diamond tools include, diamond saw blades, diamond blade, diamond segments, diamond core drill bits, diamond polishing pads, diamond wire saw, diamond frankfurt, diamond fickert, diamond abrasive brushes and other diamond grinding and abrasive tools.
For example, when cutting hard materials, a diamond blade with a soft bond would be needed. This means the metallic powders in the diamond segments (teeth) of the diamond blade wear fast enough to release old, dull crystals, exposing new diamond grains at the edges to continue cutting efficiently. Inversely, to cut a soft abrasive material like asphalt or freshly poured concrete, you would need to use a hard bonded diamond blade so that the segments and diamond grains do not wear down prematurely and the blade is not put to waste. The diamonds used in these tools are synthetic or natural industrial diamond of different grain sizes and shapes.
ChinShine manufactures diamond tools include, diamond saw blades, diamond blade, diamond segments, diamond core drill bits, diamond polishing pads, diamond wire saw, diamond frankfurt, diamond fickert, diamond abrasive brushes and other diamond grinding and abrasive tools.
Previous：Diamond Saw Blade Safety&Recommended Speed Next：What is the Difference Between Diamond Wet Blade and Dry Blade
Thank you for your interest in the above content, please leave us inquiry, you can expect a response within 24 hours.
Required fields are marked *
|
|
|
|
