How to let diamond saw blades work safety, what is the best working speed?
Check the blade shaft is clean and clear and not worn, grooved or damaged
Check the wheel bearing and shaft are in good condition
Check the blade fits tightly on shaft and is mounted correctly for the direction of cut
Follow the machine manufactures recommended pulley sizes and operating speeds for the correct diameter of blade
Inspect the blade daily before and after usage for excessive wear or signs of damage segments, core and centre bore
DON`T Force the blade onto the shaft or mount the blade on an undersized shaft
DON`T Force the blade into material being cut, allow the blade to cut at its own speed
If the diamond blade struggles to cut the specified material Re-dress the blade by running through an abrasive material
DON`T let the blade over heat when dry cutting, allow it to cool down before reuse
Ensure the circular blade has an adequate supply of water both sides of the blade whilst wet cutting
Always wear safety equipment including head, ear and eye protection, gloves and safety footwear
Previous:The Don’ts of Handling Diamond Blades Next:What is diamond tools?
Thank you for your interest in the above content, please leave us inquiry, you can expect a response within 24 hours.
Required fields are marked *
|
|
|
|